ABRASION-RESISTANT, WOVEN-FABRIC ADHESIVE TAPE

The adhesive tape comprises a polyester fabric carrier (1) and an adhesive layer applied on a side, where the quotient of titer of transverse fibers related to the length and of longitudinal fibers related to the width is 2.2-6 and the carrier has a surface weight of 118 g/m 2>. The thickness of the carrier is 180-190 mu m measured according to DIN EN 1944. The warp yarn has a yarn weight of 50-60 dtex and/or the weft thread has a yarn weight of 300-370 dtex. The thread count in the warp is 48-55/cm and the thread count in the weft is 25-30/cm. The adhesive tape comprises a polyester fabric carrier (1) and an adhesive layer applied on a side, where the quotient of titer of transverse fibers related to the length and of longitudinal fibers related to the width is 2.2-6 and the carrier has a surface weight of 118 g/m 2>. The thickness of the carrier is 180-190 mu m measured according to DIN EN 1944. The warp yarn has a yarn weight of 50-60 dtex and/or the weft thread has a yarn weight of 300-370 dtex. The thread count in the warp is 48-55/cm and the thread count in the weft is 25-30/cm. The tape has a maximum tensile force of less than 115 N/cm measured in accordance with DIN EN 14410. The abrasion resistance of the adhesive tape fulfils an abrasion class D, measured to a mandrel with 10 mm diameter according to LV 312 and/or an abrasion class C, measured to a mandrel with 5 mm diameter according to LV 312. The bending stiffness of the carrier is smaller than 3 mNx cm 2>measured in accordance with DIN 53362. The mass of adhesive layer is 40-60g/m 2>based on the tape surface. The adhesive layer is a self-adhesive coating made of rubber, acrylate or silicone. La invención se refiere a una cinta adhesiva compuesta de una portadora y una capa adhesiva aplicada en al menos un lado, la portadora es un tejido, preferiblemente una tela de poliéster tejido, caracterizado en que la relación de la densidad lineal por longitud de unidad de los hilos transversales para la densidad lineal por unidad de ancho de los hilos longitudinales está entre 2.2 y 6 y la portadora tiene un peso base mayor que o igual a 110 g/m2.