TRANSFER DEVICE

PURPOSE:To effect a high speed transfer with less noise by moving a transfer body with the winding and rewinding of a string like body and rotary body. CONSTITUTION:When a 2nd reversible rotation motor 30 is rotated in the arrow mark A direction, a rotary body 38 is driven by rotating in an arrow mark B direction. The intermediate part of a wire 51 is thus wound on the groove of the rotary body 38 in order and rewound as well to move a transfer body 1 in the right direction. The motor 30 stops its rotation at the position where a sucking body 2 is opposing to the material for press. A 1st reversible rotation motor 18 is then rotated in an arrow mark C direction to lift a lift rod 21 via a pin 20, to descend the transfer body 1 supported by rotative rollers 3-6 and the sucking body 2 sucks the opposing materials for press at the descending end. A motor 18 is then rotated in the opposite direction to the arrow mark C to lift the transfer body 1. The motor 30 is then rotated in the opposite direction to the arrow mark A to move the transfer body 1 in the left direction. The transfer body 1 is then descended and ascended again after releasing the suction of the material for press by the sucking body 2 to complete one cycle.