METHOD AND DEVICE FOR MEASURING SHAPE OF ROLL
PURPOSE:To enable roll grinding with an on-line grinder and to prolong the period for changing the roll by comparing the respective measured values before and after rolling of a steel plate or the like. CONSTITUTION:When rolls 10, 11 are pressed to the small diameter part 9 of a work roll 1 by a cyl...
Gespeichert in:
| 1. Verfasser: | |
|---|---|
| Format: | Patent |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext bestellen |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | |
|---|---|
| container_issue | |
| container_start_page | |
| container_title | |
| container_volume | |
| creator | OONO YUKIO |
| description | PURPOSE:To enable roll grinding with an on-line grinder and to prolong the period for changing the roll by comparing the respective measured values before and after rolling of a steel plate or the like. CONSTITUTION:When rolls 10, 11 are pressed to the small diameter part 9 of a work roll 1 by a cylinder 20, a beam 12 and a rod 16 parallel with the roll 1, and a rangefinder 19 heads for the axial center of the roll 1. When the rod 10 is driven in an arrow (b) direction by a stepping cylinder 17, while measuring the distance (a) between the rolls 10, 11 and the surface of the roll 1 by the rangefinder 19 the rangefinder 19 advances in parallel with the axial center of the roll and the distance (a) is measured over the entire region of the barrel length of the roll. The figure on the shape of the roll is obtd. in accordance with the position signal and distance signal of the cylinder. |
| format | Patent |
| fullrecord | <record><control><sourceid>epo_EVB</sourceid><recordid>TN_cdi_epo_espacenet_JPS5910803A</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>JPS5910803A</sourcerecordid><originalsourceid>FETCH-epo_espacenet_JPS5910803A3</originalsourceid><addsrcrecordid>eNrjZND1dQ3x8HdRcPRzUXBxDfN0dlVw8w9S8HV1DA4N8vRzVwj2cAxwVfB3Uwjy9_HhYWBNS8wpTuWF0twMCm6uIc4euqkF-fGpxQWJyal5qSXxXgHBppaGBhYGxo7GRCgBAFDjJPM</addsrcrecordid><sourcetype>Open Access Repository</sourcetype><iscdi>true</iscdi><recordtype>patent</recordtype></control><display><type>patent</type><title>METHOD AND DEVICE FOR MEASURING SHAPE OF ROLL</title><source>esp@cenet</source><creator>OONO YUKIO</creator><creatorcontrib>OONO YUKIO</creatorcontrib><description>PURPOSE:To enable roll grinding with an on-line grinder and to prolong the period for changing the roll by comparing the respective measured values before and after rolling of a steel plate or the like. CONSTITUTION:When rolls 10, 11 are pressed to the small diameter part 9 of a work roll 1 by a cylinder 20, a beam 12 and a rod 16 parallel with the roll 1, and a rangefinder 19 heads for the axial center of the roll 1. When the rod 10 is driven in an arrow (b) direction by a stepping cylinder 17, while measuring the distance (a) between the rolls 10, 11 and the surface of the roll 1 by the rangefinder 19 the rangefinder 19 advances in parallel with the axial center of the roll and the distance (a) is measured over the entire region of the barrel length of the roll. The figure on the shape of the roll is obtd. in accordance with the position signal and distance signal of the cylinder.</description><language>eng</language><subject>AUXILIARY OPERATIONS USED IN CONNECTION WITH METAL-WORKINGWITHOUT ESSENTIALLY REMOVING MATERIAL ; MANUFACTURE OF METAL SHEETS, WIRE, RODS, TUBES OR PROFILES,OTHERWISE THAN BY ROLLING ; MEASURING ; MEASURING ANGLES ; MEASURING AREAS ; MEASURING IRREGULARITIES OF SURFACES OR CONTOURS ; MEASURING LENGTH, THICKNESS OR SIMILAR LINEARDIMENSIONS ; MECHANICAL METAL-WORKING WITHOUT ESSENTIALLY REMOVINGMATERIAL ; PERFORMING OPERATIONS ; PHYSICS ; PUNCHING METAL ; ROLLING OF METAL ; TESTING ; TRANSPORTING</subject><creationdate>1984</creationdate><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://worldwide.espacenet.com/publicationDetails/biblio?FT=D&date=19840120&DB=EPODOC&CC=JP&NR=S5910803A$$EHTML$$P50$$Gepo$$Hfree_for_read</linktohtml><link.rule.ids>230,308,776,881,25542,76289</link.rule.ids><linktorsrc>$$Uhttps://worldwide.espacenet.com/publicationDetails/biblio?FT=D&date=19840120&DB=EPODOC&CC=JP&NR=S5910803A$$EView_record_in_European_Patent_Office$$FView_record_in_$$GEuropean_Patent_Office$$Hfree_for_read</linktorsrc></links><search><creatorcontrib>OONO YUKIO</creatorcontrib><title>METHOD AND DEVICE FOR MEASURING SHAPE OF ROLL</title><description>PURPOSE:To enable roll grinding with an on-line grinder and to prolong the period for changing the roll by comparing the respective measured values before and after rolling of a steel plate or the like. CONSTITUTION:When rolls 10, 11 are pressed to the small diameter part 9 of a work roll 1 by a cylinder 20, a beam 12 and a rod 16 parallel with the roll 1, and a rangefinder 19 heads for the axial center of the roll 1. When the rod 10 is driven in an arrow (b) direction by a stepping cylinder 17, while measuring the distance (a) between the rolls 10, 11 and the surface of the roll 1 by the rangefinder 19 the rangefinder 19 advances in parallel with the axial center of the roll and the distance (a) is measured over the entire region of the barrel length of the roll. The figure on the shape of the roll is obtd. in accordance with the position signal and distance signal of the cylinder.</description><subject>AUXILIARY OPERATIONS USED IN CONNECTION WITH METAL-WORKINGWITHOUT ESSENTIALLY REMOVING MATERIAL</subject><subject>MANUFACTURE OF METAL SHEETS, WIRE, RODS, TUBES OR PROFILES,OTHERWISE THAN BY ROLLING</subject><subject>MEASURING</subject><subject>MEASURING ANGLES</subject><subject>MEASURING AREAS</subject><subject>MEASURING IRREGULARITIES OF SURFACES OR CONTOURS</subject><subject>MEASURING LENGTH, THICKNESS OR SIMILAR LINEARDIMENSIONS</subject><subject>MECHANICAL METAL-WORKING WITHOUT ESSENTIALLY REMOVINGMATERIAL</subject><subject>PERFORMING OPERATIONS</subject><subject>PHYSICS</subject><subject>PUNCHING METAL</subject><subject>ROLLING OF METAL</subject><subject>TESTING</subject><subject>TRANSPORTING</subject><fulltext>true</fulltext><rsrctype>patent</rsrctype><creationdate>1984</creationdate><recordtype>patent</recordtype><sourceid>EVB</sourceid><recordid>eNrjZND1dQ3x8HdRcPRzUXBxDfN0dlVw8w9S8HV1DA4N8vRzVwj2cAxwVfB3Uwjy9_HhYWBNS8wpTuWF0twMCm6uIc4euqkF-fGpxQWJyal5qSXxXgHBppaGBhYGxo7GRCgBAFDjJPM</recordid><startdate>19840120</startdate><enddate>19840120</enddate><creator>OONO YUKIO</creator><scope>EVB</scope></search><sort><creationdate>19840120</creationdate><title>METHOD AND DEVICE FOR MEASURING SHAPE OF ROLL</title><author>OONO YUKIO</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-epo_espacenet_JPS5910803A3</frbrgroupid><rsrctype>patents</rsrctype><prefilter>patents</prefilter><language>eng</language><creationdate>1984</creationdate><topic>AUXILIARY OPERATIONS USED IN CONNECTION WITH METAL-WORKINGWITHOUT ESSENTIALLY REMOVING MATERIAL</topic><topic>MANUFACTURE OF METAL SHEETS, WIRE, RODS, TUBES OR PROFILES,OTHERWISE THAN BY ROLLING</topic><topic>MEASURING</topic><topic>MEASURING ANGLES</topic><topic>MEASURING AREAS</topic><topic>MEASURING IRREGULARITIES OF SURFACES OR CONTOURS</topic><topic>MEASURING LENGTH, THICKNESS OR SIMILAR LINEARDIMENSIONS</topic><topic>MECHANICAL METAL-WORKING WITHOUT ESSENTIALLY REMOVINGMATERIAL</topic><topic>PERFORMING OPERATIONS</topic><topic>PHYSICS</topic><topic>PUNCHING METAL</topic><topic>ROLLING OF METAL</topic><topic>TESTING</topic><topic>TRANSPORTING</topic><toplevel>online_resources</toplevel><creatorcontrib>OONO YUKIO</creatorcontrib><collection>esp@cenet</collection></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext_linktorsrc</fulltext></delivery><addata><au>OONO YUKIO</au><format>patent</format><genre>patent</genre><ristype>GEN</ristype><title>METHOD AND DEVICE FOR MEASURING SHAPE OF ROLL</title><date>1984-01-20</date><risdate>1984</risdate><abstract>PURPOSE:To enable roll grinding with an on-line grinder and to prolong the period for changing the roll by comparing the respective measured values before and after rolling of a steel plate or the like. CONSTITUTION:When rolls 10, 11 are pressed to the small diameter part 9 of a work roll 1 by a cylinder 20, a beam 12 and a rod 16 parallel with the roll 1, and a rangefinder 19 heads for the axial center of the roll 1. When the rod 10 is driven in an arrow (b) direction by a stepping cylinder 17, while measuring the distance (a) between the rolls 10, 11 and the surface of the roll 1 by the rangefinder 19 the rangefinder 19 advances in parallel with the axial center of the roll and the distance (a) is measured over the entire region of the barrel length of the roll. The figure on the shape of the roll is obtd. in accordance with the position signal and distance signal of the cylinder.</abstract><oa>free_for_read</oa></addata></record> |
| fulltext | fulltext_linktorsrc |
| identifier | |
| ispartof | |
| issn | |
| language | eng |
| recordid | cdi_epo_espacenet_JPS5910803A |
| source | esp@cenet |
| subjects | AUXILIARY OPERATIONS USED IN CONNECTION WITH METAL-WORKINGWITHOUT ESSENTIALLY REMOVING MATERIAL MANUFACTURE OF METAL SHEETS, WIRE, RODS, TUBES OR PROFILES,OTHERWISE THAN BY ROLLING MEASURING MEASURING ANGLES MEASURING AREAS MEASURING IRREGULARITIES OF SURFACES OR CONTOURS MEASURING LENGTH, THICKNESS OR SIMILAR LINEARDIMENSIONS MECHANICAL METAL-WORKING WITHOUT ESSENTIALLY REMOVINGMATERIAL PERFORMING OPERATIONS PHYSICS PUNCHING METAL ROLLING OF METAL TESTING TRANSPORTING |
| title | METHOD AND DEVICE FOR MEASURING SHAPE OF ROLL |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-09T18%3A11%3A19IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-epo_EVB&rft_val_fmt=info:ofi/fmt:kev:mtx:patent&rft.genre=patent&rft.au=OONO%20YUKIO&rft.date=1984-01-20&rft_id=info:doi/&rft_dat=%3Cepo_EVB%3EJPS5910803A%3C/epo_EVB%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rfr_iscdi=true |