FORMATION INSPECTING DEVICE FOR ARMATURE COIL

PURPOSE:To eliminate the necessity of renewing a check type whenever the shape and size of an armature coil are altered by enabling to freely adjusting a coil support in response to the designing size of the coil. CONSTITUTION:The coil retainers 29a, 29b of coil holding mechanism 25a, 25b are set to...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
1. Verfasser:	KONDOU TOSHIAKI
Format:	Patent
Sprache:	eng
Schlagworte:	CONVERSION OR DISTRIBUTION OF ELECTRIC POWER DYNAMO-ELECTRIC MACHINES ELECTRICITY GENERATION
Online-Zugang:	Volltext bestellen
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Beschreibung
Zusammenfassung:	PURPOSE:To eliminate the necessity of renewing a check type whenever the shape and size of an armature coil are altered by enabling to freely adjusting a coil support in response to the designing size of the coil. CONSTITUTION:The coil retainers 29a, 29b of coil holding mechanism 25a, 25b are set to the set angle, and respectively secured with nuts 30a, 30b with handles. Then, coil holding mechanism 25a, 25b are slided on a shaft 24, set to a set size by the graduations of scales 23a, 23b, and respectively secured with clamping screws 26a, 26b. Subsequently, the adjusting screw 34 of the other mechanism 25b is turned, and the height of the retainer 29b is set to the set size by the graduation of the scale 35. In this manner, the retainers 29a, 29b, a center block, a supporting plate 21 are set to the dimensional value which coincides with the shape and size of the coil, and the shape and size of the coil 1 are inspected.