ELECTRONIC EQUIPMENT MODULE

PROBLEM TO BE SOLVED: To lessen an electronic equipment in cost without increasing it in the number of parts, by a method wherein a projection is provided to the base of a case through a cut/lift method, and a joining hole is provided to a chassis corresponding to the projection. SOLUTION: Covers 2 and 3 are provided to both sides of a box-type case 1, and a connector 6 which connects an electronic circuit board 5 with the outside is mounted on the box-type case 1. A projection 8 is provided to the base of the box-type case l by pressing through a cut/lift method. An angular joining hole 10 is provided to a mounting chassis 11, and the projection 8 is set coincident with the joining hole 10. By this setup, a guide pin is not required to be fitted to the box-type case 1, the box-type case 1 is prevented from being erroneously inserted into the mounting chassis 11, and an electronic equipment of this constitution can be lessened in cost without increasing it in number of parts.