AEROSOL SPRAY

AEROSOL SPRAY

PROBLEM TO BE SOLVED: To materialize the extensive spray by forming a nozzle hole at a tip part of a nozzle with the specified angle relative to a tube in an aerosol spray in which an aerosol container is connected to the nozzle through the tube, and selecting the physical property of the tube to al...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Hauptverfasser: SAKAMOTO NAOKI, YOSHIZANE HIROSHI, TOMOI TAKASHI
Format: Patent
Sprache:eng
Schlagworte:
ACCESSORIES, CLOSURES, OR FITTINGS THEREFOR
AGRICULTURE
ANIMAL HUSBANDRY
APPARATUS FOR THE DESTRUCTION OF NOXIOUS ANIMALS OR NOXIOUSPLANTS
APPLYING LIQUIDS OR OTHER FLUENT MATERIALS TO SURFACES, IN GENERAL
ATOMISING APPARATUS
CATCHING, TRAPPING OR SCARING OF ANIMALS
CONTAINERS FOR STORAGE OR TRANSPORT OF ARTICLES OR MATERIALS,e.g. BAGS, BARRELS, BOTTLES, BOXES, CANS, CARTONS, CRATES,DRUMS, JARS, TANKS, HOPPERS, FORWARDING CONTAINERS
CONVEYING
FISHING
FORESTRY
HANDLING THIN OR FILAMENTARY MATERIAL
HUMAN NECESSITIES
HUNTING
NOZZLES
PACKAGES
PACKAGING ELEMENTS
PACKING
PERFORMING OPERATIONS
SPRAYING APPARATUS
SPRAYING OR ATOMISING IN GENERAL
STORING
TRANSPORTING
TRAPPING
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:PROBLEM TO BE SOLVED: To materialize the extensive spray by forming a nozzle hole at a tip part of a nozzle with the specified angle relative to a tube in an aerosol spray in which an aerosol container is connected to the nozzle through the tube, and selecting the physical property of the tube to allow the tube to vibrate during the spray. SOLUTION: In an aerosol spray, an aerosol container is connected to a nozzle 1 through a tube 3, and a nozzle hole 2 at a tip part of the nozzle is formed with the angle of 30-90 deg. relative to the tube 3. The span length of the tube 3 is set to 100 mm in accordance with the bending strength test method specified in JIS-K-6911, and formed of a material which is deflected by >=1mm under the pressure of 1kg with a pressing wedge (5+0.1R) at its center, and the material is preferably one kind to be selected among the group consisting of polyethylene, nylon, and polypropylene. The outer diameter of the tube 3 is set in the range of 0.5-5.0mm, and the length of the tube 3 is set in the range of 5.0-20cm.