SPOT LIGHT OF REMOTELY CONTROLLED CUTTER

PURPOSE: To provide a spot light for remotely controlled cuter, which is embodied small and at a low cost, can be operated smoothly permits precision locating by furnishing a slide drive part to drive determined cutter blade(s), calculating the target values, and emitting the obtained values to the slide part and a turn drive part while these parts are turned valid. CONSTITUTION: A drive blade determining means 70 is supplied with an operational control means from an operating part 9, determines the cutter blade's) to be driven. and sends the results to a drive blade selecting means 71 and a target value command means 72. The selecting means 71 selects the slide drive parts 6a1 -6d1 and turn drive parts 6a2 -6d2 to drive the cutter blade specified by the determining means 70 and turns them valid. The command means 72 computes the optimum targe value on the basis of the operational control signal and the current position condition restricted on the cutter blade determined by the means 70. The target values for the slide drive part and turn drive part are emitted one by one while they are turned valid by the means 71. The configuration permits use of a low speed microprocessor.