FITTING OF SMALL BEAM

PURPOSE:To make all the case conformable with one type fitting and even a small beam to be installed so as to get off with one type too even in the case where there are many types of beams where small means are installed, at the time of installing each small beam in the beam in use of the fitting. C...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
1. Verfasser:	KITO KAZUHISA
Format:	Patent
Sprache:	eng
Schlagworte:	BUILDING CEILINGS FIXED CONSTRUCTIONS FLOORS GENERAL BUILDING CONSTRUCTIONS INSULATION OR OTHER PROTECTION OF BUILDINGS ROOFS WALLS, e.g. PARTITIONS
Online-Zugang:	Volltext bestellen
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Beschreibung
Zusammenfassung:	PURPOSE:To make all the case conformable with one type fitting and even a small beam to be installed so as to get off with one type too even in the case where there are many types of beams where small means are installed, at the time of installing each small beam in the beam in use of the fitting. CONSTITUTION:A first junction 18B to be joined to a web 20 of a floor beam 16 and a second junction 18C to be joined to an outer surface 22A of a lower flange 22 of the floor beam 16 are installed there, while two support surfaces 18D, 18E, holding and end of a joist from both sides between, are also installed there, and this end of the joist is inserted into space between these support surfaces 18D and 18E and attached thereto. Therefore, the fitting 18 and the joist are attachable to the beam 16 without being restricted by an inner size between the lower flange 22 and an upper flange 24.