AIR CONDITIONER

To provide a dehumidifier capable of cleaning the whole heat exchanger.SOLUTION: A user operates a cleaning lever 100 for dropping cleaning water accumulated in a water storage part 71 to an evaporator 46a and lifts a drainage hole presser 80, then the cleaning lever 100 is returned to an original position and thereby the drainage hole presser 80 is returned to a position of a standby state. Then, the drainage hole presser 80 is bent by being inclined forward and downward; the whole of a water storage part drainage hole 73 cannot be closed by a seal part 81 in the standby state; and the cleaning water may be leaked. The drainage hole presser 80 is guided to the position of the standby state by formation of guide ribs 71f in the water storage part 71, and accordingly the whole of the water storage part drainage hole 73 is closed by the seal part 81 so that leakage of the cleaning water can be prevented. Therefore, when the cleaning water is injected to a cleaning water reservoir 70, the cleaning water can be surely accumulated in the water storage part 71, and the whole of the evaporator 46a can be cleaned.SELECTED DRAWING: Figure 6 【課題】熱交換器全体を洗浄可能な除湿機を提供する。【解決手段】貯水部７１に溜まった洗浄水を蒸発器４６ａに落下させるため洗浄レバー１００をユーザが操作し排水孔押え８０を持ち上げた状態にした後、洗浄レバー１００が元の位置へ戻ることで排水孔押え８０が待機状態の位置へ戻る。このとき、排水孔押え８０が前下方へ傾くことで撓み、待機状態時に貯水部排水孔７３の全体をシール部８１で閉止することができず、洗浄水漏れ発生の虞がある。貯水部７１に案内リブ７１ｆを形成したことで、排水孔押え８０が待機状態の位置へ案内されるので、シール部８１により貯水部排水孔７３の全体を閉止し、洗浄水漏れの発生を未然に阻止することができる。よって、洗浄水受け７０に洗浄水が注水されたとき、確実に洗浄水を貯水部７１に溜めることができ、蒸発器４６ａ全体を洗浄することができる。【選択図】図６