HUMIDIFIER

To provide a humidifier that prevents a large amount of dew condensation water from adhering to the vicinity of an air blowing port of a device body even when the room temperature is low.SOLUTION: When the room temperature detected by an intake air temperature sensor 52 is 18°C or higher, the number...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Hauptverfasser: IURA MAKOTO, IMAMURA YUTO, OGAWA KOTA, WASHIO TAKERU
Format: Patent
Sprache:eng ; jpn
Schlagworte:
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:To provide a humidifier that prevents a large amount of dew condensation water from adhering to the vicinity of an air blowing port of a device body even when the room temperature is low.SOLUTION: When the room temperature detected by an intake air temperature sensor 52 is 18°C or higher, the number of sections whose range is set on the basis of a humidity value is set to three, which is a first number of sections. When the room temperature is lower than 18°C, the number of sections whose range is set on the basis of the humidity value is set to four, which is a second number of sections larger than the first number of sections. A target blowing temperature is set for each section, and the target blowing temperature is set to be higher in the section for a small humidity value than in the section for a large humidity value. Since the larger number of sections is set when the room temperature is low, the setting value of the target blowing temperature can be set more finely than when the room temperature is high. Thereby, it is possible to prevent an occurrence of dew condensation water in a low room temperature state in which dew condensation water is likely to occur, and prevent dew condensation water from adhering to the vicinity of an air blowing port 40 of a device body 1.SELECTED DRAWING: Figure 6 【課題】 室温が低い場合であっても器具本体の送風口付近に多量の結露水が付着しない加湿装置を提供する。【解決手段】 吸気温度センサ52で検知された室温が18℃以上のときは、湿度値に基づき範囲が設定される区画を第1の区画数である3つだけ設定し、室温が18℃未満のときは、湿度値に基づき範囲が設定される区画を第1の区画数より多い第2の区画数である4つだけ設定し、区画毎に目標吹出し温度がそれぞれ設定され、目標吹出し温度は、大きい湿度値に対応する区画よりも小さい湿度値に対応する区画の方が高くなるよう設定したので、室温が低いときは区画数が多くなることで目標吹出し温度の設定値を室温が高いときと比較して多く設定することが可能となり、結露水が発生しやすい低室温の状態において結露水の発生を未然に阻止し、器具本体1の送風口40付近に結露水が付着することを防止することができる。【選択図】 図6