CABLE PROTECTING TUBE FOR REPAIR

PROBLEM TO BE SOLVED: To provide an inexpensive cable protecting tube for repair, with which rigidity is secured, without making an outside diameter size to be larger than an established cable protecting tube. SOLUTION: The cable protecting tube for repair 10 is provided with a first split tube part 12 and a second split tube part 14. A guide part 16 is fitted to the inner face of the first split tube part 12. When the outer face of the guide part 16 and the inner face of the second split tube part 14 are bonded and the first split tube part 12 and the second split tube part 14 are bonded, the cable protecting tube for repair 10 in an integrated tube type is formed. Since a center angle of an arc-like cross-sectional shape of the second split tube part 14 is 180 degrees or larger, a bonding part 17 of the first split tube part 12 and the second split tube part 14 will not come above the cable protecting tube for repair 10. Since the outside diameter of the cable protecting tube for repair 10 will not become large, there is less restrictions in the installation space and an existing joint etc. can be used. Since the guide part 16 covers the bonding part 17 and it reinforces the first split tube part 12, rigidity is improved. The guide part 16 covers the bonding part 17 and the bonding part 17 comes below the cable protecting tube for repair 10. Thus, cut-off performance is given, and only the small number of components is required. COPYRIGHT: (C)2007,JPO&INPIT