POWER SPRAYER

PROBLEM TO BE SOLVED: To prevent the joint of a motor and a pump from breaking and to smoothen spray work by fitting the motor on a base, supporting the pump by the motor, and separating the high temperature part of the motor from the operation part of the pump as far as possible. SOLUTION: Four foot bodies 10 and a holding frame 12 for transportation are fitted on a base 2 comprising a rectangular plate. In a motor 3, the engine 16 is fitted to the upper part on the rear side of the base 2 and the cylinder case 18 is fitted diagonally above the right side from the rear part on the left side. The casing of a pump 4 is fitted on the side wall of the cylinder case 18 of the motor 3. Since pump 4 is vibrated with the motor 3, external force applied to a joint is reduced. The operation part 74 of the pump 4 such as a control handle 67 is concentrated in the front left side part of the base 2. Besides, the high temperature part 75 of the motor 3 is concentrated in the rear right side part of the base 2 and separated from the operation part 74 as far as possible.