Semi-finished product store for drawing bench - with altered drum positioning to avoid bending of product

The product store avoids the torsion of the semi-finished products, and contains two drums, of different diameter, with parallel axes, on a base. The facing base surfaces of these drums are at right angles to the drum axis. The store contains a guide for the product, during the winding off the large...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	MIKHAI IOSIFOVICH TEMKIN, PAVEL VASILIEVICH BASHILOV, EFIM MOISEEVICH DONSKOI, LEV BORISOVICH KUZNETSOV, VITALY VYACHESLAVOVICH KOTOV, EVGENY FEDOROVICH PRUTKIN, VALENTIN VASILIEVICH BELKIN, JURY FEDOROVICH SHEVAKIN, FIKRAT SEIDALIOGLY SEIDALIEV, IGOR IOSIFOVICH DOBKIN
Format:	Patent
Sprache:	eng ; ita
Schlagworte:	AUXILIARY OPERATIONS USED IN CONNECTION WITH METAL-WORKINGWITHOUT ESSENTIALLY REMOVING MATERIAL MANUFACTURE OF METAL SHEETS, WIRE, RODS, TUBES OR PROFILES,OTHERWISE THAN BY ROLLING MECHANICAL METAL-WORKING WITHOUT ESSENTIALLY REMOVINGMATERIAL PERFORMING OPERATIONS PUNCHING METAL TRANSPORTING
Online-Zugang:	Volltext bestellen
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Beschreibung
Zusammenfassung:	The product store avoids the torsion of the semi-finished products, and contains two drums, of different diameter, with parallel axes, on a base. The facing base surfaces of these drums are at right angles to the drum axis. The store contains a guide for the product, during the winding off the large drum onto the small drum. For this winding procedure, the drums are eccentrically positioned, with a relative staggering of their axes, which is that same as half the difference between the diameters of the facing base surfaces. The drum with the smaller diameter may be displaced in both directions about the axis of the larger drum.