SETTING-UP OF WORKPIECES FOR MACHINING
A workpiece (10) is set up and held on a machining axis (17) to allow machining of the outer surface (13) in a single operation. The workpiece (10) is lightly clamped between a headstock (18) and a tailstock (35) and a datum surface (23) is provided which is a datum distance from the machining axis...
Gespeichert in:
1. Verfasser: | |
---|---|
Format: | Patent |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext bestellen |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | A workpiece (10) is set up and held on a machining axis (17) to allow machining of the outer surface (13) in a single operation. The workpiece (10) is lightly clamped between a headstock (18) and a tailstock (35) and a datum surface (23) is provided which is a datum distance from the machining axis (t7). An aligning mechanism (26) aligns the surface of the workpiece with the datum surface (23) so ensuring that the workpiece surface is a required distance from the machining axis. The clamping pressure is then increased to hold the workpiece in this position ready for machining in a single operation. |
---|