PIEZA DE UNION EN EL EXTREMO DE UN CABLE DE ALAMBRE
LA INVENCION SE REFIERE A UNA PIEZA (14) DE UNION METALICA EN UN EXTREMO DE CABLE DE ALAMBRE PARA LA RECEPCION DE FUERZAS DE TRACCION ORIGINADAS A TRAVES DE SUCESION LONGITUDINAL EN UN CABLE (2) DE ALAMBRE CON DIFERENCIAS EXTERIORES EN DIRECCION TRANSVERSAL CON RESPECTO AL EJE (12) ALARGADO DEL EXTR...
Gespeichert in:
1. Verfasser: | |
---|---|
Format: | Patent |
Sprache: | spa |
Schlagworte: | |
Online-Zugang: | Volltext bestellen |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | LA INVENCION SE REFIERE A UNA PIEZA (14) DE UNION METALICA EN UN EXTREMO DE CABLE DE ALAMBRE PARA LA RECEPCION DE FUERZAS DE TRACCION ORIGINADAS A TRAVES DE SUCESION LONGITUDINAL EN UN CABLE (2) DE ALAMBRE CON DIFERENCIAS EXTERIORES EN DIRECCION TRANSVERSAL CON RESPECTO AL EJE (12) ALARGADO DEL EXTREMO DE CABLE DE ALAMBRE, QUE SON ESENCIALMENTE IGUALES AL DIAMETRO DEL CABLE (2) DE ALAMBRE. CADA PIEZA (14) DE UNION ESTA APLICADA SOBRE SU LADO DIRIGIDO AL EXTREMO DEL CABLE DE ALAMBRE, CON UNA CAVIDAD PARA LA RECEPCION DEL EXTREMO DEL CABLE DE ALAMBRE Y SOBRE SU LADO DIRIGIDO HACIA EL EXTREMO DEL CABLE, CON MEDIOS (5) DE UNION PARA UNION DESMONTABLE DE LA PIEZA (14) DE UNION CON MEDIOS PARA LA RECEPCION DE LAS FUERZAS DE TRACCION ORIGINADAS A TRAVES DE LAS SUJECIONES LONGITUDINALES EN EL CABLE (2) DE ALAMBRE Y CONFORMANDOSE AL MENOS EN LA ZONA (4) PROVISTA CON LA CAVIDAD DE FORMA PLASTICA DE TAL MODO, QUE LAS DIFERENCIAS DE LA PIEZA (14) DE UNION EN ESTA ZONA (4) SE REDUCEN AMPLIAMENTE DE FORMA TRANSVERSAL CON REFERENCIAL AL EJE (12) DEL EXTREMO DE CABLE DE ALAMBRE COMO CONSECUENCIA DE LA CONFORMACION PLASTICA DE TAL MODO, QUE CORRESPONDEN CON UNA TOLERANCIA DE MENOS DEL 10 % AL DIAMETRO DEL CABLE (2) DE ALAMBRE, Y DE TAL MODO QUE LA PARED DE LA CAVIDAD MUESTRA AL MENOS SOBRE UNA PARTE DE SU LONGITUD COMO CONSECUENCIA DE LA CONFORMACION PLASTICA UNA ESTRUCTURA QUE CORRESPONDE A LA SUPERFICIE EXTERIOR DEL EXTREMO DE CABLE DE ALAMBRE QUE RECIBE LA CAVIDAD.
The metal connecting piece (14) has a recess in its end facing the rope to receive the rope. On the other end, it can be connected to receivers of the forces due to longitudinal tension in the rope. In its recess region, it is plastically deformed. The deformation is such that the external measurements of the connecting piece in this region (4) are so far reduced transversely to the axis, that there is a tolerance of less than 20% of the diameter of the rope. The recess wall is structured by the deformation to fit the end of the rope more closely. |
---|