MAQUINA CORTADORA DE ROLLOS

MAQUINA DE CORTAR BARRAS (100) CON ALIMENTACION AUTOMATICA E INCLUSO ENCOLADO DE CARCASAS DE BOBINAS (20'',20"). LAS CARCASAS DE BOBINAS SE INSERTAN EN BLOQUE POR UN LADO SOBRE DOS CARRILES DE ALIMENTACION (32,33) DE TAL FORMA QUE LAS CARCASAS SE SACAN LATERALMENTE SUPERPONIENDOSE EN SECCION TRANSVERSAL. LOS CARRILES DE ALIMENTACION (32,33) CON CARCASAS DE BOBINAS SE GIRAN HACIA UN LADO POR ENCIMA DEL RODILLO DE APOYO HASTA QUE DICHAS CARCASAS SON COGIDAS POR UNAS GARRAS (16) DE UNOS BRAZOS DESUJECCION (13,14) QUE LAS PONEN EN CONTACTO CON EL RODILLO DE APOYO (3) AL PRINCIPIO DEL BOBINADO. Roll-cutting machine (100) with automatic feed and perhaps gluing of coil casings (20 min ,20 sec ). The coil casings are inserted as a set from the side onto two feed beams (32,33) located above support roller (3). Sequential coil casings (20 min ,20 sec ) are braced against different feed beams (32,33) so that coil casings (20 min ,20 sec ) are laterally offset, but still overlap in cross section. Feed beams (32,33) with coil casings (20 min ,20 sec ) are pivoted to the side over the support roller until coil casings (20 min ,20 sec ) are picked up by clamping pins (16) of support arms (13,14) and brought into contact with the support roller (3) at the beginning of winding.