HIGH-STRENGTH FLAT STEEL WIRE EXHIBITING SUPERIOR HYDROGEN-INDUCED CRACK RESISTANCE

A high-strength flat steel wire contains, by mass%: C: 0.25 to 0.60%; Si: greater than 0.50% and less than 2.0%; Mn: 0.20 to 1.50%; S: 0.015% or less; P: 0.015% or less; Cr: 0.005 to 1.50%; Al: 0.005 to 0.080%; N: 0.0020 to 0.0080%; and one or two of Ca: 0 to 0.0050% and Mg: 0 to 0.0050% to satisfy...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	MATSUI, Naoki, OOBA, Hiroshi, SUGIMARU, Satoshi, ISO, Arata, TESHIMA, Toshihiko
Format:	Patent
Sprache:	eng ; fre ; ger
Schlagworte:	ALLOYS CHEMISTRY FERROUS OR NON-FERROUS ALLOYS GENERAL DEVICES FOR HEAT TREATMENT OF FERROUS OR NON-FERROUSMETALS OR ALLOYS MAKING METAL MALLEABLE BY DECARBURISATION, TEMPERING OR OTHERTREATMENTS METALLURGY METALLURGY OF IRON MODIFYING THE PHYSICAL STRUCTURE OF FERROUS METALS TREATMENT OF ALLOYS OR NON-FERROUS METALS
Online-Zugang:	Volltext bestellen
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Beschreibung
Zusammenfassung:	A high-strength flat steel wire contains, by mass%: C: 0.25 to 0.60%; Si: greater than 0.50% and less than 2.0%; Mn: 0.20 to 1.50%; S: 0.015% or less; P: 0.015% or less; Cr: 0.005 to 1.50%; Al: 0.005 to 0.080%; N: 0.0020 to 0.0080%; and one or two of Ca: 0 to 0.0050% and Mg: 0 to 0.0050% to satisfy [Ca] + [Mg] > 0.20 × [S], with the balance composed of Fe and impurities, the high-strength flat steel wire has tensile strength of 1000 MPa or more, an average value of Hv hardness measured in a cross section perpendicular to a longitudinal direction of 320 or more and less than 450, a standard deviation ÃHv of the measured value of 15 or less, and a width/thickness ratio of not less than 1.5 nor more than 10. [Ca], [Mg], and [S] represent contents of respective elements by mass%.