Pouring structure for battery pack

An inlet port (41) of a service plug cover (40) has an inner diameter smaller than the outer shape of a service plug (22) as viewed from above. The gap between the service plug (22) and the inner peripheral edge of the inlet port (41) of the service plug cover (40) is set so as to be smaller than a...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	LOO, WENG LEONG, HONJO, HIDEKI, TOZUKA, YUJI, TANEDA, RYOJI, KAWAMURA, HIROKI, MAEDA, AKIRA, KAMIYA, YUJI, TAKASAKI, SEIICHI, INAGAKI, MASANORI
Format:	Patent
Sprache:	eng ; fre ; ger
Schlagworte:	BASIC ELECTRIC ELEMENTS ELECTRIC EQUIPMENT OR PROPULSION OF ELECTRICALLY-PROPELLEDVEHICLES ELECTRICITY ELECTRODYNAMIC BRAKE SYSTEMS FOR VEHICLES, IN GENERAL MAGNETIC SUSPENSION OR LEVITATION FOR VEHICLES PERFORMING OPERATIONS PROCESSES OR MEANS, e.g. BATTERIES, FOR THE DIRECT CONVERSIONOF CHEMICAL INTO ELECTRICAL ENERGY TRANSPORTING VEHICLES IN GENERAL
Online-Zugang:	Volltext bestellen
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Beschreibung
Zusammenfassung:	An inlet port (41) of a service plug cover (40) has an inner diameter smaller than the outer shape of a service plug (22) as viewed from above. The gap between the service plug (22) and the inner peripheral edge of the inlet port (41) of the service plug cover (40) is set so as to be smaller than a preset value (e.g., 9.5 mm) when the service plug cover (40) is fixed to a floor panel (11) with a battery pack (21) mounted on a vehicle body (10).