Adhesive tape with textile holder for cable bandaging

The adhesive band (1) comprises a carrier based on non-woven that is equipped unilaterally with an adhesive coating. The carrier has a specific weight per area of 30-120 g/m 2>and consists of a layer of spun nonwoven, sutures, meltblown nonwoven or mechanically hardened staple fiber nonwoven that take over with threads. The threads pass parallel to each other in machine direction. The fiber number of take-over threads lies under the value of 20 threads/25 mm width of the carrier. The nonwoven material is solidified by calendering. The adhesive band (1) comprises a carrier based on non-woven that is equipped unilaterally with an adhesive coating. The carrier has a specific weight per area of 30-120 g/m 2>and consists of a layer of spun nonwoven, sutures, meltblown nonwoven or mechanically hardened staple fiber nonwoven that take over with threads. The threads pass parallel to each other in machine direction. The fiber number of take-over threads lies under the value of 20 threads/25 mm width of the carrier. The nonwoven material is solidified by calendering. The carrier consists of layers of homogeneous or different non-woven that is cut out through the threads parallely running to each other. The mechanically hardened staple fiber non-woven is strengthened through air- and/or water jet streams or through needling. The adhesive coating is an adhesive mass on the basis of natural rubber, synthetic rubber, acrylate or silicon or is low molecular acrylate melt pressure sensitive adhesive mass (12, 24). The adhesive tape is led in a screw line around a cable set.