PROCESS FOR UPGRADING HEAVY OIL USING A HIGHLY ACTIVE SLURRY CATALYST COMPOSITION

Applicants have developed a new residuum full hydroconversion slurry reactor system that allows the catalyst, unconverted oil and converted oil to circulate in a continuous mixture throughout an entire reactor with no confinement of the mixture. The mixture is partially separated in between the reactors to remove only the products and hydrogen gas, while permitting the unconverted oil and the slurry catalyst to continue on into the next sequential reactor. A portion of the unconverted oil is then converted to lower boiling point hydrocarbons, once again creating a mixture of unconverted oil, products, hydrogen, and slurry catalyst. Further hydroprocessing may occur in additional reactors, fully converting the oil. Additional oil may be added at the interstage feed inlet, possibly in combination with slurry. The oil may alternately be partially converted, leaving a highly concentrated catalyst in unconverted oil which can be recycled directly to the first reactor.