MOLD DESIGNING METHOD AND APPARATUS

When a molten plastic is molded using a metal mold, sufficient cooling time has to elapse before the metal mold is opened, but this cooling time restricts the production per unit time. If a metal mold is opened without sufficient cooling, the plastic undergoes significant deformation by thermal shrink. If this deformation can be estimated and the metal mold designed so as to make allowance for the anticipated deformation, it will be possible to produce a molding with a shape that is equal to the design dimensions, despite shortening the cooling time. The finite element method is used to obtain the deformation. Mold design can also be performed taking account of the deformation due to the hydrostatic pressure that is produced when the molding is filled with its liquid contents. In addition, as for a portion of an in-mold labelled container which include lamination construction, the deformation due to thermal shrink is not estimated as a container which an in-mold label is not being applied. On this case, we have a method which is simulating deformation after adding parameters relating to the material of this label, said parameters including at least its thermal conductivity and coefficient of linear expansion. The thermal conductivity deformation simulation is by the finite element method. Production per unit time can be increased and metal mold design can be carried out independently of experience.