Stud fastener for vehicle bodywork - is made of flexible material and has flanks with parallel outer edges and bent-off ends

Stud fastener for vehicle bodywork - is made of flexible material and has flanks with parallel outer edges and bent-off ends

The fastener consists of flexible flat material, and is used for the retention of studs, extending through apertures, of ornamental battens, logos, ets, esp. on vehicle bodies. The fastener has a flat base with two bent-off flanks. Each flank has a recess near the end, engaged around and retaining t...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
1. Verfasser: MUENSINGER,WALTER
Format: Patent
Sprache:eng ; ger
Schlagworte:
BLASTING
DEVICES FOR FASTENING OR SECURING CONSTRUCTIONAL ELEMENTS ORMACHINE PARTS TOGETHER, e.g. NAILS, BOLTS, CIRCLIPS, CLAMPS,CLIPS, WEDGES, JOINTS OR JOINTING
ENGINEERING ELEMENTS AND UNITS
GENERAL MEASURES FOR PRODUCING AND MAINTAINING EFFECTIVEFUNCTIONING OF MACHINES OR INSTALLATIONS
HEATING
LIGHTING
MECHANICAL ENGINEERING
THERMAL INSULATION IN GENERAL
WEAPONS
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The fastener consists of flexible flat material, and is used for the retention of studs, extending through apertures, of ornamental battens, logos, ets, esp. on vehicle bodies. The fastener has a flat base with two bent-off flanks. Each flank has a recess near the end, engaged around and retaining the stud. The flanks (3) have parallel outer edges (9), and the free ends (6) are bent off towards the base (2) at an angle (alpha) of approx. 45 deg. Base and flanks have the same width. The recesses are limited by straight edges, which are at an angle of approx. 45 deg. relative to the outer edges.