The mounting for a shaped body with a cover at a carrier, e.g. a component at a papermaking/cardboard/tissue production machine, has complementary contours giving a tight fit between them to be locked together by a clamp

To mount a shaped body (2) at a carrier (5), at a papermaking or cardboard or tissue production machine, both bodies are locked together by a clamp (12), with no play between them through their manufactured tolerances. The mounting allows a rapid exchange of the fitted body at the carrier. The two bodies are sealed against each other to prevent the entry of fibers or soiled process water. The mounting for a shaped body at a carrier, has a clamping action which dampens and prevents vibrations, and the foil angle is unchanged during the clamping action. For the clamping effect, two defined clamping lines in addition to the main clamping line give the mounted body an unambiguous lie between it and the carrier. An Independent claim is included for a mounting, to secure a shaped body to a carrier, which has an inner contour (6) along the length of the under side of the shaped body and a complementary outer contour (9) is along the length of the carrier, at its upper side. At least one clamp, which can be operated, is between the two contours. The shaped body can have half a T-groove at one side, and half a swallowtail groove at the other side, to accommodate matching ribs at the carrier. with the clamp at the swallowtail contour. It can have a complete T-groove at one side, to be engaged by a T-rib of the carrier, with the clamp at the groove base, and clamps at each of the short end sides. The inner contour of the shaped body can be a swallowtail groove (8), with a recess at the base, and the carrier has a swallowtail body with a parallel plug, with clamps at both swallowtail sides. The clamp can be between the T-rib of the carrier and a clamping rail at it, preferably with an integrated and central V-groove. The clamp can also be between the T-rib of the carrier and the groove base at the shaped body. The T-rib at the carrier can have chamfers at the ends of the T-bar, for clamps to be fitted under them. The clamp can also be at the center of the swallowtail groove. The upright of the T-rib at the carrier can be shorter on one side, and the clamp is an eccentric which is rotated by a cam disk or electromotor. The clamp can also be an elastomer hose, with a controlled inner pressure of 0.5-5.0 bar and preferably 2.0-3.5 bar. The hose pressure is set by a pressure supply with a control unit. The pressure supply is linked to at least two clamps, and preferably all the clamps. The clamp is resistant to acid and alkali process water, preferably in a pH range of 2.