PROCESS OF CONTINUOUS MANUFACTURE OF RECYCLING, SILICATE, FLAT. DECORATIVE, SINTERED LINING MATERIAL

Waste glass is heated to a temperature in the range of 1200 degC to 1800 degC, lower fraction of the melt is then removed and the upper one is delivered to a water bath with temperature in the range of 90 degC to 100 degC. The matter is then crushed to particles with diameter up to 3 mm and in ratio...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	NIEDERGESASS-GAHLEN REINER, SPILA MILOSLAV, STACHON WITOLD, POSTULKA ANTONIN, JANICEK DRAHOMIR, PECKA JAN MGR
Format:	Patent
Sprache:	cze ; eng
Schlagworte:	BUILDING CHEMICAL COMPOSITION OF GLASSES, GLAZES, OR VITREOUSENAMELS CHEMISTRY CLIMATE CHANGE MITIGATION TECHNOLOGIES IN THE PRODUCTION ORPROCESSING OF GOODS FINISHING WORK ON BUILDINGS, e.g. STAIRS, FLOORS FIXED CONSTRUCTIONS GENERAL TAGGING OF CROSS-SECTIONAL TECHNOLOGIES SPANNING OVER SEVERAL SECTIONS OF THE IPC GENERAL TAGGING OF NEW TECHNOLOGICAL DEVELOPMENTS GLASS JOINING GLASS TO GLASS OR OTHER MATERIALS MANUFACTURE, SHAPING, OR SUPPLEMENTARY PROCESSES METALLURGY MINERAL OR SLAG WOOL SURFACE TREATMENT OF FIBRES OR FILAMENTS MADE FROM GLASS,MINERALS OR SLAGS SURFACE TREATMENT OF GLASS TECHNICAL SUBJECTS COVERED BY FORMER USPC CROSS-REFERENCE ART COLLECTIONS [XRACs] AND DIGESTS TECHNOLOGIES OR APPLICATIONS FOR MITIGATION OR ADAPTATION AGAINSTCLIMATE CHANGE
Online-Zugang:	Volltext bestellen
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Beschreibung
Zusammenfassung:	Waste glass is heated to a temperature in the range of 1200 degC to 1800 degC, lower fraction of the melt is then removed and the upper one is delivered to a water bath with temperature in the range of 90 degC to 100 degC. The matter is then crushed to particles with diameter up to 3 mm and in ration ranging from 70 to 80 parts it is mixed with 20 to 30 parts of silicon material of grain size up to 3 mm and further with 1 to 2 parts of sodium silicate, ground to a fraction up to 3 mm in diameter and with 2 to 5 parts of water. Subsequently the mixture is poured into molds to a layer thickness within the range of 8 to 15 mm and at a rate of 0.3 to 0.4 m/min it passes through a device where it is heated up to a temperature ranging from 850 degC to 950 degC for a period of 35 to 40 minutes. Then surface thereof is cooled down to temperature within the range of 720 degC to 750 degC within 5 to 10 minutes, whereupon it is further cooled down at a rate of 2 to 4 degC/min to a temperature ran