Fuel pump taking-out mold convenient to disassemble

The utility model discloses a fuel pump mould convenient to disassemble and take out, which comprises a working table, two supporting plates are fixed on the upper end face of the working table, a guide rod is fixed between the two supporting plates, two mounting plates are mounted above the working table, sleeves are embedded in inner cavities of the mounting plates in a penetrating manner, and moulds are mounted on the surfaces of the mounting plates. Connecting blocks are fixed to the upper end and the lower end of the mold correspondingly, inner cavities of the connecting blocks are sleeved with clamping plates, and non-slip mats are fixed to the surfaces of the clamping plates. According to the mold, the clamping plate can be driven to move by rotating the bolt, so that the clamping plate extrudes the rear end face of the mounting plate, rapid connection of the mold and the mounting plate can be facilitated, meanwhile, the connecting rod mounted between the two molds can enable the two molds to be relati