Cooperation structure of suitcase clamp plate assembly blanking cover and latch hook

The utility model provides a guarantee to eliminate the luggage -boot lid putting in order with the back panel assembly Y produced under the car state to with X to accumulative total deviation prerequisite under, the cooperation structure of suitcase clamp plate assembly blanking cover and latch hook in clearance between reducible blanking cover and the latch hook. This structure key lies in that latch hook and blanking cover installation department install movable nut board, clamp plate assembly and blanking cover for the latch hook from inside to outside in proper order, and the latch hook is fixed on the movable nut board is installed to the latch hook, and the blanking cover is equipped with the waist type hole that can supply the latch hook to pass, is equipped with the blanking cover pilot hole that can supply the latch hook to pass on the clamp plate assembly, and the back of blanking cover is located waist type hole both sides and is equipped with the pterygoid lamina of mobile joint at the blanking cover pilot hole back. The utility model discloses compare the suitcase latch hook of traditional structure and always go up the complicated size chain link relation of blanking cover with the clamp plate, directly let latch hook and the blanking cover on the clamp plate assembly fix a position to reduce the clearance between blanking cover and the latch hook, promoted appearance quality, when having reduced the adjuster of main engine plants, promoted production efficiency.