A mould that is used for two holders of partly riveting of ball bearing to process

The utility model provides a mould that is used for two holders of partly riveting of ball bearing to process, belongs to the processing field of bearing, includes mandrel, packing ring, nut and the gland be connected with the lathe, it has pocket spot facing work passageway and rivet processing passageway to distribute on the gland, and pocket spot facing work passageway and rivet processing passageway respectively with wait to process that pocket hole on the holder is the same with the rivet hole figure, the position corresponds, be provided with card platform II around the bottom surface of gland, encircle the upper surface of workstation is provided with card platform I, and inner peripheral surface upper portion and the lower part of waiting to process the holder are blocked respectively and is established on the lateral wall of calorie platform II and card platform I, then fixed with gland and mandrel through the nuts and washers. The utility model discloses a rivet hole and pocket hole are processed out to a clamping, and the position relation of the two has obtained fine assurance, processed rivet hole and pocket hole error free position phenomenon, but two arbitrary selections carry out the matched stack, and convenient assembling can not appear turning round strength or bend the phenomenon of rivet when wearing the rivet.