I -shaped wheel automatic control conveyor

The utility model discloses a I -shaped wheel automatic control conveyor, including setting up the installation frame on fixed platform, the both sides wall top of installation frame is provided with the rim roll complex slope guide rail of taking turns with the I -shaped, is provided with a pair of rolling bearing unit on the installation frame both sides wall of slope guide rail below, is provided with the horizontal drive axle between the rolling bearing unit, the one end of horizontal drive axle is stretched out the rolling bearing unit who corresponds and is linked to each other with the one end of reversing the arm is fixed, and the other end that reverses the arm links to each other with the tailpiece of the piston rod who drives the actuating cylinder subassembly is articulated, and the cylinder body end hinge that drives the actuating cylinder subassembly connects on fixed platform, fixed mounting has a pair of upset arm on the axle body of horizontal drive axle, and V type groove structure is roughly being constituteed by preceding fender arm and backstop arm on the whole to the upset arm, and the cooperation can be kept out with the shaft of I -shaped wheel to preceding fender arm and backstop arm, when it follows horizontal drive axle horizontal hunting, and the I -shaped wheel of can letting pass one by one. The utility model discloses can carry the I -shaped wheel by automatic control.