Electronically-controlled orientation control mechanism for U-shaped parts

The utility model discloses an electronically-controlled orientation control mechanism for U-shaped parts. The electronically-controlled orientation control mechanism is characterized in that a conduit is vertically arranged on a support plate; an upper guide slot and a lower guide slot, which are distributed up and down, are formed in the sidewall of the conduit; sliding grooves are respectively formed in the upper guide slot and the lower guide slot; an upper guide rod and a lower guide rod are respectively slidably matched with the sliding grooves of the upper guide slot and the lower guide slot through guide pins; the tail end of the upper guide rod is hinged to one end of a long rocker through a connecting pin, and the other end of the long rocker is hinged to one crank shaft; the tail end of the lower guide rod is hinged to one end of a short rocker through a connecting pin, and the other end of the short rocker is hinged to the other crank shaft; the crank shafts are fixed on two sides of a driven gear; the driven gear is fixed on the support plate through a support frame; the driven gear is engaged with a driving gear fixed on a motor shaft; a motor is fixed on the support plate; a stop pin, which is opposite to the lower guide rod and is vertical to the lower guide rod, is arranged on the conduit along the horizontal direction. The electronically-controlled orientation control mechanism has the advantages of simple structure, convenience for operation, low labor intensity and high working efficiency.