CPVC pipe with 25% higher hydrostatic design basis than required under ASTM D2846

CPVC pipe in diameters in the range from 15 mm (0.5 inch) to 15.24 cm (6 ins), to carry hot and cold aqueous streams under 690 KPa (100 psi) pressure and 82.2°C (180°F) in continuous service, is extruded from a compound in which the CPVC has a high CI content in range from 66.5%-70%, when modified w...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	NEWBY, ROBERT S, MANGO, ROCCO A, BACKMAN, ARTHUR L, OLAH, ANDREW M
Format:	Patent
Sprache:	eng
Schlagworte:	BLASTING CHEMISTRY COMPOSITIONS BASED THEREON COMPOSITIONS OF MACROMOLECULAR COMPOUNDS ENGINEERING ELEMENTS AND UNITS GENERAL MEASURES FOR PRODUCING AND MAINTAINING EFFECTIVEFUNCTIONING OF MACHINES OR INSTALLATIONS HEATING JOINTS OR FITTINGS FOR PIPES LIGHTING MEANS FOR THERMAL INSULATION IN GENERAL MECHANICAL ENGINEERING METALLURGY ORGANIC MACROMOLECULAR COMPOUNDS PIPES SUPPORTS FOR PIPES, CABLES OR PROTECTIVE TUBING THEIR PREPARATION OR CHEMICAL WORKING-UP THERMAL INSULATION IN GENERAL WEAPONS
Online-Zugang:	Volltext bestellen
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Beschreibung
Zusammenfassung:	CPVC pipe in diameters in the range from 15 mm (0.5 inch) to 15.24 cm (6 ins), to carry hot and cold aqueous streams under 690 KPa (100 psi) pressure and 82.2°C (180°F) in continuous service, is extruded from a compound in which the CPVC has a high CI content in range from 66.5%-70%, when modified with either of two specific impact high rubber modifiers in an amount greater than 5 parts but no more than 6 parts per 100 parts of CPVC. Extruded CPVC pipe provides a HDB measured according to ASTM D2837-01 which is 25% or more greater than that required for commercial pipe as specified in ASTM D2846. As a result, both SDR-11 and SDR-13.5 pipe are produced which provide a HDB greater than 1250 psi (8.62 MPa) at the 100,000 hr intercept.