LAMELLE IN EINER LUFTDÜSE

The stretched flat module for vehicles formed as lamella (1) and air deflectors for incorporating into a frame of a roof window, consists of Reny W 110(RTM: Polyarylamide) staggered with short fibers, which are carbon fibers, metal thread sections or plastic fibers with roughened outer surface. The flat module is formed with extensions and protrusion for connection with other structural elements or for storing or attaching the structural elements. The lamella comprises an adjusting element formed as a rotating- or slide element or an indicator, and a metallic insert. The stretched flat module for vehicles formed as lamella (1) and air deflectors for incorporating into a frame of a roof window, consists of Reny W 110(RTM: Polyarylamide) staggered with short fibers, which are carbon fibers, metal thread sections or plastic fibers with roughened outer surface. The flat module is formed with extensions and protrusion for connection with other structural elements or for storing or attaching the structural elements. The lamella comprises an adjusting element formed as a rotating- or slide element or an indicator, and a reinforced metallic insert. The lamella is stored in a vertical lamella arrangement in a box of an air nozzle with a front air discharge opening and a back connection at the air-feeding chute, which is either integrated or supported in a deviating manner. The lamella arrangements are operable over the lamella in a nozzle. The lamella is formed as a connection part, in which insert is used, which stretches over the entire length of the lamella. The insert is extended with a longitudinal stripe made of plastic or completely surrounded by the plastic. The extending edge of the insert is guiding components for the slide element and/or forms a current supply bar for the display element. The insert shows a projecting rise or a projection, that forms a stop for the slide element in lateral displacement. The slide element double-sidely surrounds the lamella in depths direction. The lamella has bearing pins (5, 6) projecting on the upper and lower frontal areas for mingling or diverting the air jet in outlet. The bearing pins are molded from plastic or are projected from the insert or the insert shows projections, which extend to the bearing pins. The insert is corrugated or pressed or shows a corrugated or a pressed structure and/or holes. The insert is a stamping part or a pressure die casting part and has a depth of 4-30 mm. The lamellae have a depth of