TROCKNEREINHEIT FÜR DRUCKLUFT UND ANDERE GASFÖRMIGE MEDIEN

A discharge throttle/pressure control valve is adjusted based on the time to control the air delivered by moisture content at the outlet. The control valve exhibits member, where an outlet opening and valve acts to form circular membrane by pre-stressed feather into the closing position. The solenoid valve is steered against the output signal in connection with discharge opening (74). A cyclone and/or coalescent filter are upstream to the inlet-side, arranged on the lower end of the housing (16). The dripping off element is adjusted vertically and attached to the wall. A liquid support filter is arranged in a chamber over the wall of the cyclone cabinet and covered by a hydrophobe sinter material with flow rate is low. The wall of cyclone part is provided with an outflow hole and the inlet-side coupled with a metal also pipe set up with exchanger ribs extends into the axle of the area. The dryer cartridge exhibits a capsule-shaped housing whose ends are closely attached in circular direction. The connecting ring represents a back-up ring for sealing ring over which the dryer cartridge is sealed against the housing and linked by the throttle. The rinsing air covers a central mortar channel/ a circular mortar channel. The unit is provided with agent to rotate symmetrical and flow from inside to outside. A signal disc in which treated air washed from with humidity contenting air has appearance and is visible by lens of the housing.