ELEKTROMAGNETVENTIL FÜR FLÜSSIGE MEDIEN, INSBESONDERE HEISSWASSER

The electromagnetic valve for liquids, and especially hot water, has a valve chamber (1.1) within a housing (1) linked to the inflow (VE) through a valve seat (6) in the inflow channel (2) and to the outflow (VA) through an outflow channel (3). The magnet system (4) within the housing has an end of...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	GLAUS, UWE, BERGER, GERD, RIEDEL, HEINZ-DIETER
Format:	Patent
Sprache:	ger
Schlagworte:	ACTUATING-FLOATS BLASTING COCKS DEVICES FOR VENTING OR AERATING ENGINEERING ELEMENTS AND UNITS GENERAL MEASURES FOR PRODUCING AND MAINTAINING EFFECTIVEFUNCTIONING OF MACHINES OR INSTALLATIONS HEATING LIGHTING MECHANICAL ENGINEERING TAPS THERMAL INSULATION IN GENERAL VALVES WEAPONS
Online-Zugang:	Volltext bestellen
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Beschreibung
Zusammenfassung:	The electromagnetic valve for liquids, and especially hot water, has a valve chamber (1.1) within a housing (1) linked to the inflow (VE) through a valve seat (6) in the inflow channel (2) and to the outflow (VA) through an outflow channel (3). The magnet system (4) within the housing has an end of the armature (9) through the coil (4.1) bonded to a valve plate (8). A barrier membrane (8.1) seals the valve chamber against the magnet system, from the outer edge at the level of the inflow channel opening in a consistent downwards curvature to the valve shaft (9.2). All of the membrane is below its outer edge, at least when the valve is closed., so that no air or steam bubbles cling to the membrane, but are led out through a take-off channel (2.1) at a sharp upward angle at the inner wall of the inflow channel.