ANSCHLUSSLEISTE IN DER FERNMELDETECHNIK
Insulation displacing connectors (24) of an "inverted" type extend upwardly from a base (14) of the terminal block (12) into connector chambers (66) of driver modules (50) movable relative to the base (14) between upper and lower positions. Passageways (70) within the modules (50) direct s...
Gespeichert in:
Hauptverfasser: | , , , , |
---|---|
Format: | Patent |
Sprache: | ger |
Schlagworte: | |
Online-Zugang: | Volltext bestellen |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | Insulation displacing connectors (24) of an "inverted" type extend upwardly from a base (14) of the terminal block (12) into connector chambers (66) of driver modules (50) movable relative to the base (14) between upper and lower positions. Passageways (70) within the modules (50) direct service wires (46) moved through the passageways (70) into the connector chambers (66) and into entrance openings (30) underlying upper edge portions (28) of the insulation displacing connectors (24) within the chambers (66). Movement of the module (50) from its upper position to its lower position drives the service wires (46) downwardly from the entrance openings (30) of the connectors (24) into and through slots (32) underlying the entrance openings (30), to establish electrical contact with the service wires (46) and the connectors (24) and, in the case of larger diameter wires, to impale the service wires upon impaling elements (34) resisting pullout of the wires. Downward movement of a module (50) also establishes conductive engagement between the connectors (24) and tip and ring conductors (76) of an overvoltage limiting element (74). Sealant pump chambers (88) within the modules (50) and cooperating sealant pump elements (92) upon.the base (14) of the terminal block (12) introduce reserve sealant material (84) into the modules (50) upon movement of the modules (50) from an upper position to a lower position, to eliminate or at least reduce the size of voids in the sealant material (84). A test clip surface (98) upon the module (50) inclines a test clip (94) attached thereto away from an adjacent clip (94). The modules (50) are driven from their upper positions to their lower positions by thread-forming fasteners (58). |
---|