VERFAHREN UND VORRICHTUNG ZUM VERFORMEN VON WERKSTÜCKEN AUS THERMOPLASTISCHEN KUNSTSTOFFEN

A process is proposed in which the amount of heat necessary for deforming is supplied from inside only to the part (2) to be deformed, and the part (2) is thereby heated up to the softening temperature of the plastic, and this temperature is maintained until the part (2) assumes the shape dictated b...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	MAIER, DIETER, EGNER, HARALD, FROEHLICH, STEFAN.
Format:	Patent
Sprache:	ger
Schlagworte:	AFTER-TREATMENT OF THE SHAPED PRODUCTS, e.g. REPAIRING MAKING GRANULES OR PREFORMS PERFORMING OPERATIONS PREPARATION OR PRETREATMENT OF THE MATERIAL TO BESHAPED RECOVERY OF PLASTICS OR OTHER CONSTITUENTS OF WASTE MATERIALCONTAINING PLASTICS SHAPING OF MATERIAL IN A PLASTIC STATE, NOT OTHERWISE PROVIDEDFOR SHAPING OR JOINING OF PLASTICS TRANSPORTING WORKING OF PLASTICS WORKING OF SUBSTANCES IN A PLASTIC STATE, IN GENERAL
Online-Zugang:	Volltext bestellen
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Beschreibung
Zusammenfassung:	A process is proposed in which the amount of heat necessary for deforming is supplied from inside only to the part (2) to be deformed, and the part (2) is thereby heated up to the softening temperature of the plastic, and this temperature is maintained until the part (2) assumes the shape dictated by the mould (1) and it subsequently remains in the mould (1) until it has cooled. In addition, a flexible heating core for carrying out this process is described, the core being designed such that a heating conductor winding (6) is arranged in an insulating sleeve (5), and the insulating sleeve (5) is provided with a liner (8) on its outer wall, and a pull relief (4) extends longitudinally in the centre of the heating core (3) and one end of the heating core (3) is provided with a receptacle (7) for the pull relief (4), which runs out into the open at the other end.