MTU Laser-Based Direct-Write Techniques: Recent Development and Nanoparticles Patterning Results

Two laser-based direct-write techniques to guide particles from a mist source to a target substrate by laser beams were recently developed at Michigan Tech. The laser-guided direct-write (LGDW) technique uses a hollow optical fiber, while the laser-guided microsensor patterning (LGMP) technique uses a micrometer-sized aperture. The techniques are suggested to be utilized for patterning microstructures made of nanoparticles that are either crystallized from liquid precursors or directly deposited from nanoparticle-in-liquid suspensions. The computational results based on the paraxial Fraunhofer approximation of a Gaussian beam diffracted by a circular aperture and experimental measurements of corresponding deposition rate under different conditions suggest several factors for setup optimization of LGMP. The results indicate that among the most important factors are the aperture size relative to the laser beam-waist size and the divergence of the beam near the aperture. Examples of gold-thiolate, protein-coated polystyrene, and carbon-polymer composites deposition are presented. This article is from the Mat. Res. Soc. Symp. Proc. Vol. 758 p151-156, 2003. This article is from ADA417756 Materials Research Society Symposium Proceedings, Volume 758 Held in Boston, Massachusetts on December 3-5, 2002. Rapid Prototyping Technologies