A Software Toolbox for Systematic Evaluation of Seismometer-Digitizer System Responses
Measurement of the absolute amplitudes of a seismic signal requires accurate knowledge of the seismometer-digitizer response. When the seismometer and digitizer characteristics are known, deconvolution of the digital system response is relatively straightforward. However, even with a known response,...
Gespeichert in:
Hauptverfasser: | , , , , |
---|---|
Format: | Report |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext bestellen |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | Measurement of the absolute amplitudes of a seismic signal requires accurate knowledge of the seismometer-digitizer response. When the seismometer and digitizer characteristics are known, deconvolution of the digital system response is relatively straightforward. However, even with a known response, problems in timing and incorrect polarities can often contaminate any calibration parameters derived from these data. When either one or both components of the response for a seismometer system are unknown, the data are often not considered suitable for seismological tasks that require absolute amplitude measurements.
Published in the Proceedings of the 2011 Monitoring Research Review - Ground-Based Nuclear Explosion Monitoring Technologies, 13-15 September 2011, Tucson, AZ. Volume II. Sponsored by the Air Force Research Laboratory (AFRL) and the National Nuclear Security Administration (NNSA). U.S. Government or Federal Rights License |
---|