Penetration Performance of Tungsten Alloy Penetrators with L/D Ratios of 1 to 1/32

A combined experimental and computational investigation was conducted to determine the terminal ballistic performance and transient behavior of low L/ D (length/diameter ratio) tungsten alloy penetrators impacting normal incidence rolled homogeneous armor (RHA) targets at 2 km/s. Each penetrator had...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Hauptverfasser: Bjerke, Todd W, Zukas, Jonas A, Kimsey, Kent D
Format: Report
Sprache:eng
Schlagworte:
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:A combined experimental and computational investigation was conducted to determine the terminal ballistic performance and transient behavior of low L/ D (length/diameter ratio) tungsten alloy penetrators impacting normal incidence rolled homogeneous armor (RHA) targets at 2 km/s. Each penetrator had a nominal diameter of 25.4 mm, and an L/D of either 1. 1/2, 1/4, 1/8, 1/16, or 1/32. Experiments were performed using a 50-mm high pressure powder gun and a push- launch sabot. Data collected consisted of penetrator attitude and velocity at impact, depth of penetration, crater diameter, and limited information regarding residual penetrator material. Numerical simulations of each of the penetrators impacting RHA were performed with the Lagrangian code SMACH and the Eulerian code CTH. Both codes exhibited good agreement with experimental data. Errata sheet inserted.