Global Structural Behavior and Leg Strength for Jack-Up Rigs with Varying Environmental Parameters

In the mobile jack-up unit, the leg supporting the hull is a very important structure, and it is important to closely examine the changes in accident load, environmental load, and seabed ground during jack-up operation. Generally, jack-up rigs are three-legged structures with a triangular hull that comprises several movable legs used to raise the hull above the sea surface. They can be operated in shallow water at less than 120 m, while large jack-up rigs, which have a structure that can withstand severe environmental loads, can be employed at depths ranging from 150 m to 200 m. However, a complex process is required to finalize the structural design of a jack-up rig, and the influence of various parameters must be comprehensively considered. In other words, the rig will encounter variable environmental conditions with variations in parameters such as wave height, wave period, wind speed, air gap, and so on. A unified procedure is proposed to review the structural strength of legs, hulls, and cantilevers, and different models and analyses can be configured so that it can be solved within a unit flow-chart. Through this process, we can expect that engineering time and cost can be reduced. From survey results, it was possible to determine the inputs to examine the effects of variables, and a large jack-up rig operating under extreme environmental conditions was modeled. In the present study, the jack-up rig was operating in the North Sea, and leg length and water depth were 160 m and 100 m, respectively. The basic environmental characteristics included wave height (20 m), wave period (10 s), wind speed (30 m/s), and air gap (22 m). A parametric sensitivity analysis was performed with varying environmental parameters. Through sensitivity analysis of environmental characteristics, the significance and sensitivity of the effect of each environmental parameter on leg strength was clarified. It is expected that this will be very useful guidance about the effect of parameters during the conceptual design stage of jack-up rigs.