Evaluation of the corrosion resistance of a Ni-P coating deposited on additive manufacturing steel: A dataset
This article presents the data set obtained for the research work entitled “Effect of a Ni-P coating on the corrosion resistance of an additive manufacturing carbon steel immersed in a 0.1 M NaCl solution” [1]. Microstructural, mechanical, and electrochemical characterization (using the electrochemi...
Gespeichert in:
Veröffentlicht in: | Data in brief 2020-10, Vol.32, p.106159-106159, Article 106159 |
---|---|
Hauptverfasser: | , , , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | This article presents the data set obtained for the research work entitled “Effect of a Ni-P coating on the corrosion resistance of an additive manufacturing carbon steel immersed in a 0.1 M NaCl solution” [1]. Microstructural, mechanical, and electrochemical characterization (using the electrochemical impedance and electrochemical noise spectroscopy technique) is performed on a material obtained by additive manufacturing and the influence of a Ni-P coating on it. The layer sizes and hardness of the substrate are measured, as well as the thickness of the coating and its hardness, values for corrosion resistance, resistance to electrochemical noise and location indices are calculated. The data show an adequate deposition rate for the type of coating, as well as the increase in corrosion resistance when the coating is applied to the steel by additive manufacturing. |
---|---|
ISSN: | 2352-3409 2352-3409 |
DOI: | 10.1016/j.dib.2020.106159 |