Enhancement of the Mechanical and Tribological Properties of Aluminum-Based Alloys Fabricated by SPS and Alloyed with Mo and Cr

Multicomponent aluminum-based alloys doped with chromium (Cr) and molybdenum (Mo), fabricated by spark plasma sintering (SPS), derived from a powder mixture prepared by mechanical alloying, were studied in this work. The morphology of the pristine and worn surfaces was analyzed using a scanning electron microscope equipped with an energy-dispersive X-ray spectroscopy system. The obtained alloys exhibited higher hardness (73 and 72) for the Al–Mo and Al–Cr alloys, respectively, compared to reference bronze. Besides improved hardness, SPS-sintered alloys also showed a lower value of the weight and linear wear and the highest score-resistance compared to bronze. The enhanced tribological behavior is related to the formation of secondary structures on the friction surfaces of rubbing pairs, which in turn reduce wear. For the first time, the present research has demonstrated the effectiveness of the addition of Mo and Cr for the fabrication of sintered multicomponent Al-based alloys with a tailored microstructure that induces the formation of secondary structures on the tribosurfaces due to the self-organization processes during friction.