Multi objective optimization and evaluation approach of prefabricated component combination solutions using NSGA-II and simulated annealing optimized projection pursuit method

As a main carrier mode for the sustainable development of the construction industry in China, prefabricated building may lead to problems such as cost overruns, project delays, and waste of resources due to unreasonable selection of prefabricated components. Therefore, we quantitatively analyze the contribution rate of quality optimization of prefabricated components using QFD-SEM. Under the constraints of prefabrication rate, quality optimization contribution rate, and expected values of various sub-goals, we propose a multi-objective optimization method for prefabricated component combinations based on cost, duration, and carbon emissions. By using NSGA-II to solve the model, we can obtain a set of optimal Pareto solutions for prefabricated component combinations. Based on the optimal Pareto solution set, we establish a multi-objective evaluation model using simulated annealing optimization projection tracing method, and select the optimal prefabricated component combination solution according to the projected eigenvalues of the solutions. An empirical study is conducted using an eleven-story framed building in Shenzhen, Guangdong Province, China as a case study. The results show that: (1) Using this method, optimal solutions can be obtained in an unbounded solution space, with the optimal solution having advantages over both fully cast-in-place and fully prefabricated solutions. Compared to the fully cast-in-place solution, the duration and carbon emissions are reduced by 36.62% and 12.74% respectively, while compared to the fully prefabricated solution, costs are reduced by 4.15%. (2) There is a certain negative correlation between the cost of prefabricated component combinations and duration, carbon emissions, and quality optimization, while there is a certain positive correlation with the prefabrication rate. (3) The size of the optimal projection direction vector based on the optimization objectives indicates that carbon emissions have the greatest impact on the evaluation results of the solutions.