A Study on Available Power Estimation Algorithm and Its Validation

Three different algorithms that can be used to estimate the available power of a wind turbine are investigated and validated in this study. The first method is the simplest and using the power curve with the measured nacelle wind speed. The other two are to estimate the equivalent wind speed first without using the measured Nacelle wind speed and to estimate the available power from the rotor power equation. The two methods are different in that the second method is to use the drive-train model to estimate the rotor torque but the third method is to use a simplified equation to avoid sharp peaks in the wind speed estimation. Simulations were performed to validate the constructed available power estimation algorithms with the measured data of a 2 MW target wind turbine. It was found from the validation that the third available power estimation algorithm works properly and is closer to the power actually generated from the wind turbine than the other methods considered. In addition, the third algorithm that showed the best performance was further validated with the DPPT (demanded power point tracking) operation with Matlab/Simulink environment. It was found from the simulation that the third algorithm works well in the DPPT operation to estimate the available power of the wind turbine.