Nanobiocatalyst beds with Fenton process for removal of methylene blue

The remediation of methylene blue from wastewater using chitosan-sunflower-nano-iron (CSN) beds was examined in this study with the Fenton process. Nano-iron is synthesized using the green synthesis process. Then, biopolymer beds obtained nano-iron, sunflower tray waste, and chitosan. These beds used the Fenton process for removing Methylene blue (MB) from water. Beds synthesis and dye removing are characterized using SEM, TEM, FTIR, and XRD techniques. For the method optimization, the effects of dye concentration, temperature, pH, H 2 O 2 , and amount of biocatalyst were studied. The result of the wavelength scan was found 660 nm for methylene blue dye. Using CSN, catalyst was very effective in color removal for MB under optimal conditions. The highest removal rate 98% was obtained at pH 6 for 270 min. The optimum conditions for the MB dye are as follows; dye concentration: 25 mg/L, amount of absorbent: 2.5 mg/mL, temperature: 60 °C, H 2 O 2 amount: 20 mg/L (600 µL, 30%). When the experiment is studied in optimum conditions, max. dye removal was calculated to be 98%. From SEM, TEM, XRD, and FTIR results, the change in the surface of the biocatalyst could be clearly observed. It is understood that the biocatalyst synthesized from the results we obtained easily removed a large amount of dye (MB).