Non-contact identification of rotating blade vibration
This paper presents a non-contact measurement and diagnostic method for the parametric identification of vibrations of rotating engine blades, based on blade tip-timing (BTT) measured by optical sensors. Because of the inherent under-sampling nature of BTT measurements, effective algorithms are need...
Gespeichert in:
Veröffentlicht in: | Mechanical Engineering Journal 2015, Vol.2(3), pp.15-00025-15-00025 |
---|---|
Hauptverfasser: | , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | This paper presents a non-contact measurement and diagnostic method for the parametric identification of vibrations of rotating engine blades, based on blade tip-timing (BTT) measured by optical sensors. Because of the inherent under-sampling nature of BTT measurements, effective algorithms are needed to extract key vibration parameters such as frequency and amplitude from the measurement. In this paper, an Enhanced Estimation of Signal Parameters via Rotational Invariance Technique (E2SPRIT) is proposed. The main advantage of this technique is its ability to analyze both single and multi-mode blade vibrations spreading across a wide dynamic range, while accommodating the effect of varying rotational speeds and sensor installation errors. Analysis and numerical simulation have shown that the method can effectively improve the accuracy and robustness of vibration frequency and amplitude estimation compared to traditional ESPRIT. |
---|---|
ISSN: | 2187-9745 2187-9745 |
DOI: | 10.1299/mej.15-00025 |