Predicting Wood Density Using Resistance Drilling: The Effect of Varying Feed Speed and RPM

The IML PD series Resi is a device used to assess the drilling resistance of wood. The IML PD series Resi instrument is being widely adopted for commercial wood quality assessment due to its speed, cost-effectiveness, and precision when combined with web-based trace processing. Collecting Resi data with fixed feed speed and RPM settings is challenging due to inherent basic density variations within and between tree species. Altering these settings affects the drilling resistance amplitude of the Resi data, impacting basic density predictions. This study introduces the concept of chip thickness to combine feed speed and RPM into a single parameter to minimise the effects of different sampling conditions on the basic density predictions. Regression models, with chip thickness as the regressor variable, account for 97% to 99% of variance in mean Resi outerwood amplitude across six species. The demonstrated adaptability of chip thickness for adjusting feed speed and RPM settings, along with species-specific functions correlating it with Resi amplitude, holds promise for standardizing amplitude values across diverse feed speeds and RPM settings. Optimal sampling conditions needed to predict basic density lie within the 30%–40% amplitude range. To drill a ~30 cm diameter tree, the recommended fastest settings were 200 cm/min and 3500 RPM for Southern Pine (Pinus elliottii var. elliottii (Engelm) × Pinus caribaea var. hondurensis (Sénéclauze)) and Radiata Pine (Pinus radiata (D. Don.)), 200 cm/min and 2500 RPM for Hoop Pine (Araucaria cunninghamii (Mudie)), 50 cm/min and 5000 RPM for Spotted Gum (Corymbia citriodora subsp. variegata (F. Muell.)), 200 cm/min and 4500 RPM for White Cypress (Callitris glaucophylla (Thompson & Johnson)), and 150 cm/min and 3500 RPM for Shining Gum (Eucalyptus nitens (H. Deane & Maiden) Maiden) based on the billets sampled.