Effect of Oscillating Area on Generating Microbubbles from Hollow Ultrasonic Horn
Microbubbles, which are tiny bubbles with a diameter of less than 100 µm, have been attracting attention in recent years. Conventional methods of microbubble generation using porous material and swirling flows have problems such as large equipment size and non-uniform bubble generation. Therefore, w...
Gespeichert in:
Veröffentlicht in: | Technologies (Basel) 2024-06, Vol.12 (6), p.74 |
---|---|
Hauptverfasser: | , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | Microbubbles, which are tiny bubbles with a diameter of less than 100 µm, have been attracting attention in recent years. Conventional methods of microbubble generation using porous material and swirling flows have problems such as large equipment size and non-uniform bubble generation. Therefore, we have been developing a hollow ultrasonic horn with an internal flow path as a microbubble-generating device. By supplying gas and ultrasonic waves simultaneously, the gas–liquid interface is violently disturbed to generate microbubbles. Although this device can generate microbubbles even in highly viscous fluids and high-temperature fluids such as molten metals, it has the problem of generating many relatively large bubbles of 1 mm or more. Since the generation of a large amount of microbubbles in a short period of time is required to realize actual applications in agriculture, aquaculture, and medicine, conventional research has tried to solve this problem by increasing the amplitude of the ultrasonic oscillation. However, it is difficult to further increase the amplitude due to the structural reasons of the horn and the behavior of bubbles at the horn tip; therefore, the oscillating area of the tip of the horn, which had not received attention before, was enlarged by a factor of 2.94 times to facilitate the ultrasonic wave transmission to the bubbles, and the effect of this was investigated. As a result, a large number of gases were miniaturized, especially at high gas flow rates, leading to an increase in the amount of microbubbles generated. |
---|---|
ISSN: | 2227-7080 2227-7080 |
DOI: | 10.3390/technologies12060074 |