Modeling and Design of Mechatronic Control Preheating Foundry Mold as a System with Distributed Parameters

Modeling and Design of Mechatronic Control Preheating Foundry Mold as a System with Distributed Parameters

The article deals with modelling and control of preheating of mechatronics foundry mold as a system with distributed parameters. At the beginning of article the fundamental structures of distributed parameters systems are described. The mechatronics foundry mold and simulation model of it in COMSOL...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Sborník vědeckých prací Vysoké školy báňské--Technické univerzity Ostrava. Řada strojní 2014-06, Vol.60 (1), p.1-12
Hauptverfasser: Bartalský, Lukáš, Hulkó, Gabriel
Format: Artikel
Sprache:eng
Schlagworte:
control synthesis
DPS Blockset
identification
preheating foundry molds
simulation
system with distributed parameters
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The article deals with modelling and control of preheating of mechatronics foundry mold as a system with distributed parameters. At the beginning of article the fundamental structures of distributed parameters systems are described. The mechatronics foundry mold and simulation model of it in COMSOL Multiphysics are described in the next part of article. Article also described the system identification of mold by using the process responses in MATLAB Identification Toolbox. Subsequently deals with the simulation control loop by using DPS Blockset for MATLAB & Simulink.
ISSN:1210-0471
1804-0993
DOI:10.22223/tr.2014-1/1972