Submerged Bioreactor Production of Geobacillus stearothermophilus ATCC 7953 Spores for Use as Bioindicators to Validate Hydrogen Peroxide Inactivation Processes

In the food and pharmaceutical industries, evaluating the sterilization performance preceding aseptic production processes is of central importance. In the case of hydrogen peroxide sterilization of solid surfaces, bioindicators (BI) consisting of spores of Bacillus atrophaeus or Geobacillus stearot...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Methods and protocols 2021-09, Vol.4 (3), p.63
Hauptverfasser: Stier, Philipp, Kulozik, Ulrich
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:In the food and pharmaceutical industries, evaluating the sterilization performance preceding aseptic production processes is of central importance. In the case of hydrogen peroxide sterilization of solid surfaces, bioindicators (BI) consisting of spores of Bacillus atrophaeus or Geobacillus stearothermophilus are used to validate the effectiveness and efficiency of the inactivation procedure. Commercial production of G. stearothermophilus is commonly performed on agar plates, where cultivation and sporulation conditions are not well-defined. Therefore, the produced BI can vary in their resistance, which in turn creates unacceptable uncertainties in the evaluation of aseptic processes. Submerged production in the bioreactor would allow more control over sporulation conditions, while reducing production time, resistance variability, and avoidance of false-positive or false-negative test results. In addition, submerged production of G. stearothermophilus so far was a challenge to achieve sufficiently high spore concentrations for BI production. This study reports on the development of a method for submerged production of G. stearothermophilus spores (pH 7.0, 57 °C, 30% pO2) that can achieve 1.6 × 107 spores/mL with a resistance against 35% H2O2 at 25 °C of D25°C,35% H2O2 = 73 s. This resistance ranks within the range of commercially available BI, making the results directly transferable to industrial applications.
ISSN:2409-9279
2409-9279
DOI:10.3390/mps4030063