Soft, tough, and fast polyacrylate dielectric elastomer for non-magnetic motor
Dielectric elastomer actuators (DEAs) with large electrically-actuated strain can build light-weight and flexible non-magnetic motors. However, dielectric elastomers commonly used in the field of soft actuation suffer from high stiffness, low strength, and high driving field, severely limiting the D...
Gespeichert in:
Veröffentlicht in: | Nature communications 2021-07, Vol.12 (1), p.4517-4517, Article 4517 |
---|---|
Hauptverfasser: | , , , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | Dielectric elastomer actuators (DEAs) with large electrically-actuated strain can build light-weight and flexible non-magnetic motors. However, dielectric elastomers commonly used in the field of soft actuation suffer from high stiffness, low strength, and high driving field, severely limiting the DEA’s actuating performance. Here we design a new polyacrylate dielectric elastomer with optimized crosslinking network by rationally employing the difunctional macromolecular crosslinking agent. The proposed elastomer simultaneously possesses desirable modulus (~0.073 MPa), high toughness (elongation ~2400%), low mechanical loss (tan
δ
m
= 0.21@1 Hz, 20 °C), and satisfactory dielectric properties (
ε
r
= 5.75, tan
δ
e
= 0.0019 @1 kHz), and accordingly, large actuation strain (118% @ 70 MV m
−1
), high energy density (0.24 MJ m
−3
@ 70 MV m
−1
), and rapid response (bandwidth above 100 Hz). Compared with VHB
TM
4910, the non-magnetic motor made of our elastomer presents 15 times higher rotation speed. These findings offer a strategy to fabricate high-performance dielectric elastomers for soft actuators.
Dielectric elastomer actuators (DEAs) with large electrically actuated strain can be used in non-magnetic motors, but high stiffness, poor strength and slow response currently limit the application of DEAs. Here, the authors optimize the crosslinking network in a polyacrylate elastomer to enable a DEA with high toughness and actuation strain and use the polyacrylate to build a motor which can be driven under low electric field. |
---|---|
ISSN: | 2041-1723 2041-1723 |
DOI: | 10.1038/s41467-021-24851-w |